LevelOne WAB-7000 Manuale Utente Pagina 52
- Pagina / 64
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0
52
4.5 DHCP Server
Click on the DHCP link under the LAN menu. DHCP stands for Dynamic Host
Configuration Protocol. The DHCP section is where you configure the built-in DHCP
Server to assign IP addresses to the computers and other devices on your local area
network (LAN). In most situations, the router provides DHCP services, and you can
leave this option disabled. However, if for any reason the router does not provide
DHCP services, enable this option. The AP's DHCP Server will then manage the IP
addresses and other network configuration information for wireless clients associated
with the AP. The computers (and other devices) connected to your LAN also need to
have their TCP/IP configuration set to DHCP or Obtain an IP address
automatically.
Enable DHCP Server: Place a check in this box if you would like this device to
function as a DHCP Server.
DHCP IP Address Range: Enter the first and last IP address of the range. Make
sure that the range is on the same subnet as the device. These two IP values (from
and to) define a range of IP addresses that the DHCP Server uses when assigning
addresses to computers and devices on your Local Area Network. Any addresses
that are outside of this range are not managed by the DHCP Server; these could,
therefore, be used for manually configured devices or devices that cannot use DHCP
to obtain network address details automatically.
Primary / Secondary DNS: Enter an IP address for the primary and secondary DNS
servers. This field is optional.
DHCP Lease Time: The amount of time that a computer may have an IP address
before it is required to renew the lease. The lease functions just as a lease on an
apartment would. The initial lease designates the amount of time before the lease
- WAB-7000 1
- Revision History 4
- 1 Introduction 5
- 1.2 Package Contents 6
- 1.3 Bridge/AP Description 6
- 1.5 Mounting Install Guide 8
- 1.6 System Requirements 10
- 1.7 Applications 10
- 1.8 Network Configuration 10
- 2 Understanding the Hardware 12
- 3.1 Logging In 14
- 3.2 System 16
- 3.2.1 Administrator Settings 16
- 3.2.2 Firmware Upgrade 19
- 3.2.3.1 System Reboot 21
- 3.3 Wireless 24
- 3.3.1 SSID Configuration 24
- 3.3.4 Wireless Security 28
- 3.3.6 SNMP 31
- 3.5 Logs 33
- 3.6 Statistics 35
- 4.1 Logging In 36
- 4.2 System 37
- 4.2.1 Administrator Settings 37
- 4.2.2 Firmware Upgrade 39
- 4.2.3.1 System Reboot 41
- 4.3 Wireless 43
- 4.3.1 SSID Configuration 43
- 4.3.6 SNMP 50
- 4.4 LAN 51
- 4.5 DHCP Server 52
- 4.6 MAC Address Filter 54
- 4.7 Logs 55
- 4.8 Statistics 56
- Supper terminal steps 58
- Appendix A – Specifications 62
- IMPORTANT NOTE: 63
- Appendix C – IC Statement 64
Prodotti e manuali riguardandi Punti d’accesso WLAN LevelOne WAB-7000
(49 pagine)Canon XEED WUX500ST manuales
Manuales del propietario y guías del usuario para Proyectores de datos Canon XEED WUX500ST.
Ofrecemos 2 manuales en pdf Canon XEED WUX500ST para descargar gratis por tipos de documentos: Manual de usuario
Commenti su questo manuale