LevelOne FCS-3052 Manuale Utente

FCS-3052 3-Megapixel Day/Night PoE Dome Network Camera User’s Manual H/W: V1.0

6 ii. Connect the PoE (1), DIDO (2), and Audio (3) Cables to their respective terminals. See below for more details regarding the DIDO and Audio con

7 c. For wall installation: i. Chose the location on the wall to place the camera. ii. Drill four holes through the center of the four location ho

8 from the product package to tighten the four included screws clockwise through the four holes on each side of the device as shown below. The bes

9 iii. Release the video adjustment screw and to adjust the lens direction. After completion, tighten the video adjustment screw. f. Complete the

10 Camera Connection a. Basic Connection (Without PoE) b. Connect the camera device to the Ethernet hub using a RJ45 Ethernet cable. c. Connect th

11 System Requirements Operating System: Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer: IBM PC/AT Comp

12 Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to

13

14

15 2. Do not check the box if user would like to check the hardware installation settings. Otherwise click “Skip the hardware installation” to skip

Product name: FCS-3052 Release Date: 2012/12/13 Manual Revision: V1.0 Default Settings IP Address DHCP Username admin Password admin

16 3. Select the Network Camera from the survey list and enter the user name and password. The user name and password are assigned as

17 4. Setting the Network Camera IP address. User can either select simple mode or professional mode for network camera IP setting. If

18 5. Please make sure the internet connection is ready then start to do the internet discovery, otherwise click “Skip” to finish the

19 continue or click “X” on the top right of the screen to finish the installation. Once installation is completed, the Administrator should procee

20 Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation o

21 Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and pass

22 Live View Live View is the default page that opens when accessing the camera. Live video is displayed directly in the browser window.  Stream1~

23 better video quality. The downside of using this protocol is that the quality of its real-time effect is less than that of the UDP protocol. UDP -

24  Motion Detection - Enable the motion detection alert function.  Mute - Turn off the sound.  Talk - To communicate through the camera using

25 Configuration Click <Configuration> on the main page to change the camera settings pages. NOTE - Only Administrators can access the Confi

Table of Contents Package Contents ... 1 Hard

26 Profile – Up to five profiles can be created for different lighting environments. Day, night and sunset are default profiles and users can create

27 Profile Management: Profiles can be scheduled to change at scheduled times or under different lightening changes. Always - Select Always to us

28 Schedule – Select Schedule to schedule specific time periods for different profiles. Digital Inputs - Select Digital Input to have the profile

29 Video The Network Camera offers several separate streams for different viewing options.

30 Stream 1 ~ 3 Video Codec - The Network Camera offers three choices of video codec standards for real-time viewing: H.264, MPEG-4 and MJPEG. Vide

31 Text To make a note about the camera, check “Enable” and select the display position from the drop-down menu. Enter a video description in the tex

32 Audio The administrator can set up several streams for the camera for different viewing devices. The administrator can enable or disable the audio

33 Privacy Mask Control The camera is equipped with a privacy feature which allows users to mask the whole or partially of the camera’s live view.

- 34 -

- 35 -

E-mail Settings ... 50 Samba Settings ...

- 36 -

- 37 -

- 38 -

- 39 -

- 40 -

- 41 -

- 42 -

- 43 -

- 44 -

- 45 -

1 Package Contents  FCS-3052  Power Adapter  Quick Installation Guide  CD Manual/Utility

- 46 -

- 47 -

- 48 -

- 49 -

- 50 -

- 51 -

- 52 -

- 53 -

- 54 -

- 55 -

2 Hardware Device Appearance

- 56 -

- 57 -

- 58 -

- 59 -

- 60 -

- 61 -

- 62 -

3 LED Indicators Function LED Behavior Description Power LED Continuous illumination Power on Power LED Unit Power off Link LED Continuous illuminati

4 Hardware Reset The Reset Button can be used to reboot the camera or restore it to factory default settings. If the camera experiences a problem,

5 Hardware Installation a. Remove the dome cover: Unscrew the screws and remove the dome cover from the camera device. b. PoE, Power, DIDO, Audio